VisitorRego Requirements

VisitorRego Requirements

PC Requirements

To install and run VisitorRego, your PC must meet the following minimum specifications:

  • CPU: Intel Core i3 or higher (or processor with comparable x64 benchmarked performance)
    Note: Processors need to provide performance comparable to an Intel Core i3. Devices using ultra-low-power or ARM-based CPUs are not supported.

  • Memory: Minimum 4GB RAM (8GB or more recommended for optimal performance)

  • Operating System: Windows 10 or 11

  • Architecture: 64-bit (x64)

  • .NET Framework: Microsoft .NET Framework 4.0 or higher

  • Internet Connectivity: Required for software installation and updates

WarningARM-based processors are not supported.
This includes devices using chipsets such as Qualcomm Snapdragon (e.g. Surface Pro X). VisitorRego is designed for traditional x64 Windows PCs only.


Hardware Requirements for Full System Functionality

In addition to the PC specifications above, the following hardware is required for full use of VisitorRego:

  • Display: The screen can be either a touchscreen, or the software can be used on a standard PC with a monitor, keyboard, and mouse

  • USB Ports: At least two available USB ports for connecting the scanner and printer. A USB hub may be used if additional ports are required

  • Scanner: Required for barcode/QR code scanning

    • Must be omnidirectional and support USB to serial emulation

    • Recommended Model: Honeywell Orbit 7190G (2D capable, supports QR codes)

  • Label Printer: Required for visitor badge printing

    • Must be at least 300dpi and thermal

    • Recommended Model: Brother QL-700

  • Front-Facing Camera: Required if using the photo capture feature


AlertNote: If you supply your own hardware, it must meet these specifications. However, VisitorRego does not provide support for third-party hardware.

    • Related Articles

    • System Setup

      System Setup in VisitorRego's Admin Mode serves as the central hub for configuring settings of the VisitorRego application. This menu provides access to a wide range of settings that allow you to customise and manage the software's behaviour and ...

    • Plain Paper Printer Setup

      To specify a plain paper printer to be used by VisitorRego so that you can print full page reports for your records, follow the instructions below. From VisitorRego's Admin mode select Options > General tab, then expand the Printers section. Click ...

    • Card Printer Setup

      VisitorRego has the ability to print labels directly to a specific printer. The function allows for a card printer to be used rather than the paper label printer that is normally used. Printing labels on a card printer provides a much more durable ...

    • Self Registration Fields Setup

      As different companies require different sets of information from their visitors, VisitorRego has the ability to change what fields it displays on the Self-Registration screen. These fields can be configured on the Self Registration Fields window. ...

    • Choosing Your Site

      After installing VisitorRego or connecting a site to VRP, it is important to choose your site so that the software functions correctly. In most cases, after connecting a site to VRP and restarting the software, it will detect the site mismatch and ...