Label Printers FAQ
How do I order more labels?
Labels can be ordered here.
Why is the label printer printing two stickers instead of one?
If names are being printed on two stickers instead of one, generally this means someone has pulled a label through a little too enthusiastically and has caused the printer to lose it’s bearings with the black alignment markings on the back of the labels.
Labels can be ordered here.
Why is the label printer printing two stickers instead of one?
If names are being printed on two stickers instead of one, generally this means someone has pulled a label through a little too enthusiastically and has caused the printer to lose it’s bearings with the black alignment markings on the back of the labels.
Usually, you can use the feed button on the printer to feed a label through. This should reset the alignment. Do a test print to check.
Why is the label printer printing blank labels?
Most likely the label roll has been incorrectly inserted upside down. The label roll should be facing downwards, open the casing to view how the label roll has been fitted.
Why is the label printer printing blank labels?
Most likely the label roll has been incorrectly inserted upside down. The label roll should be facing downwards, open the casing to view how the label roll has been fitted.
How do I change the labels in the label printer?
Label rolls can be changed by following the instructions in the knowledge base article specific to the type of label printer you have. Please see the corresponding link below for instructions.
Related Articles
Label Printer Setup
Label Printers are a common component of a VisitorRego system. Visitors are printed a visitor label for easy identification on your site. The label also includes a QR code or barcode, so that the visitor can easily sign themselves out using the ...Printer Troubleshooting
If you are experiencing issues with your label printer, the troubleshooting guide below may help you fix the issue. Firstly, make sure that labels labels are loaded correctly, and that the printer is online. Label rolls can be loaded by following the ...Dymo Printer Configuration
After setting up a label printer in VisitorRego, it is important to configure the printer to the correct label size that it uses. This article refers to the Dymo LabelWriter 450 Label Printer. Drivers for the printer should already be installed. If ...Changing a Label Roll on Seiko Label Printer
This guide applies to the Seiko 450 & Seiko 650 printer, pictured respectively. To change a label roll, ensure the printer power cord is connected and the printer is turned on. The green Status Light should be flashing. 1. Press the left and right ...Low Label Email Notification
VisitorRego has the ability to send an email notification that the labels in your printer are running low. This is particularly useful if your VisitorRego unit is in an unattended area, or if you have a VisitorRego Kiosk where the label printer is ...