Changing the Label Roll on a Dymo 450 Label Printer

Changing the Label Roll on a Dymo 450 Label Printer

This guide applies to the Dymo LabelWriter 450 Label Printer.

1. Open up the lid of the label printer.

2. If a roll of labels was already loaded, press the label the label eject button to eject the labels.



3. Remove the spool from the printer



4. Separate the spool, by pulling it apart



5. Remove the roll of labels from the spool



On the inside of the spool there is an arrow that indicates the unwind direction of the roll. This is the direction the labels need to be feeding out from.


6. Load the new roll of labels onto the spool, then put the other end of the spool back on tightly for a secure fit on either side of the roll.



7. Mount the loaded spool back into the printer



8. Feed the loose end of the labels, label side down, into the slot.



As the labels are fed into the slot, the printer will sense the correct position and advance the labels accordingly.
If the labels do not automatically advance, press the label advance button.


9. Slide the label guide to the right edge of the label.



10. Close the label lid.

During the process of changing the label roll, a dialogue box may have appeared on the VisitorRego screen in the bottom right. Press Resume to resume printing once the label roll is changed.


    • Related Articles

    • Changing the Label Roll on a Brother QL-700 Label Printer (Counter)

      This guide applies to VR Counter units that have a Brother QL-700 Label Printer. 1. Hold the printer by the front, and firmly lift the roll compartment cover to open the cover. 2. Remove the old label roll and label cartridge by gently pulling on the ...

    • Changing the Label Roll on a Brother QL-700 Label Printer (Flex)

      This guide applies to VR Flex units that have a Brother QL-700 Label Printer. 1. Locate the keys for your Flex, then unlock and open the enclosure drawer that houses the label printer. You can find the lock on the backside of the VR Flex enclosure. ...

    • Changing the Label Roll on a Brother QL-700 Label Printer (Kiosk)

      This guide applies to VR Kiosk units that have a Brother QL-700 Label Printer. 1. Locate the keys for your kiosk, then unlock and open the enclosure that houses the label printer. Once you have unlocked the enclosure door, carefully pull it towards ...

    • Label Printer Setup

      Label Printers are a common component of a VisitorRego system. Visitors are printed a visitor label for easy identification on your site. The label also includes a barcode, so that the visitor can easily sign themselves out using the barcode scanner. ...

    • Changing a Label Roll on Seiko Label Printer

      This guide applies to the Seiko 450 & Seiko 650 printer, pictured respectively. To change a label roll, ensure the printer power cord is connected and the printer is turned on. The green Status Light should be flashing.   1. Press the left and right ...