Changing a Label Roll on Seiko Label Printer

Changing a Label Roll on Seiko Label Printer





This guide applies to the Seiko 450 & Seiko 650 printer, pictured respectively.

To change a label roll, ensure the printer power cord is connected and the printer is turned on. The green Status Light should be flashing.


 

1. Press the left and right side of the Roll Cover, and lift up the edge of the Roll Cover to open.

2. Remove the spindle from the printer and insert the label roll into the spindle so that the free end of the label.

3. The labels feed from the bottom of the roll, label side down.

4. Put the labels and spindle back into the printer.

5. Insert the free end of the roll into the paper inlet slot.

6. Push the label stock into the paper inlet slot until you feel a slight resistance.

7. Continue pushing gently until the labels are fed correctly.


The printer automatically feeds the labels through and aligns the end in the exit slot. If the label end doesn't appear through the exit slot, press and release the Form Feed Button (the middle button with an arrow) to advance the labels.

    • Related Articles

    • Label Printer Setup

      Label Printers are a common component of a VisitorRego system. Visitors are printed a visitor label for easy identification on your site. The label also includes a QR code or barcode, so that the visitor can easily sign themselves out using the ...

    • Label Printers FAQ

      How do I order more labels? Labels can be ordered here.   Why is the label printer printing two stickers instead of one? If names are being printed on two stickers instead of one, generally this means someone has pulled a label through a little too ...

    • Changing the Label Roll on a Brother QL-700 Label Printer

      This guide applies to the Brother QL-700 Label Printer. 1. Locate the keys to your VisitorRego unit and open the enclosure that houses the label printer. 2. Open the print cover using the indent pictured (if applicable). 3. Remove the old label roll ...

    • Changing the Label Roll on a Dymo 450 Label Printer

      This guide applies to the Dymo LabelWriter 450 Label Printer. 1. Open up the lid of the label printer. 2. If a roll of labels was already loaded, press the label the label eject button to eject the labels. 3. Remove the spool from the printer 4. ...

    • Seiko Printer Configuration

      After setting up a label printer in VisitorRego, it is important to configure the printer to the correct label size that it uses. This article refers to the Seiko Smart Label printer 450 and 650 model. Drivers for the printer should already be ...