Popular Articles
Changing the Label Roll on a Dymo 450 Label Printer
This guide applies to the Dymo LabelWriter 450 Label Printer. 1. Open up the lid of the label printer. 2. If a roll of labels was already loaded, press the label the label eject button to eject the labels. 3. Remove the spool from the printer 4. ...
Loading Staff from Active Directory – Network Connected
Active Directory and LDAP can be leveraged to enable automated importation of a staff list into VisitorRego. Active Directory integration is intended for a system administrator or IT specialist to set up. Knowledge of how your Active Directory is ...
Scanner Troubleshooting
If you are experiencing issues with your scanner, the troubleshooting guide below may help you fix the issue. Generally, most scanner issues can be resolved by resetting the scanner. Reset the scanner by unplugging it from the VisitorRego unit, then ...
Brother Printer Configuration
After setting up a label printer in VisitorRego, it is important to configure the printer to the correct label size that it uses. This article refers to the Brother QL-700 Label Printer. Drivers for the printer should already be installed. If not, ...
Changing the Label Roll on a Brother QL-700 Label Printer
This guide applies to the Brother QL-700 Label Printer. 1. Locate the keys to your VisitorRego unit and open the enclosure that houses the label printer. 2. Open the print cover using the indent pictured (if applicable). 3. Remove the old label roll ...